Shanghai Clever Co., Ltd. -

Shanghai Clever Co., Ltd.

Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]

spot drill
Specification: ARX-618 Spot drill
Detail: Item No.: ARX-618 Free Speed...1, 800rpm Drill Blt...8mm

1/2" i***ct wrench
Specification: ARX-15 1/2" Impact Wrench
Detail: Item NO.: ARX-15 Free Speed...6, 500rpm Rated Torque...230 Ft Lbs Bolt Capacity...12mm shank O/A Length...185mm Weight...2.2kg Hose...10 mm O/D Pressure...95-105 PSI Maximum Compressor...12 CFM

hand riveter
Specification: ARX-HRN2
Detail: Good Grip plastic handles; Plastic strap to keep closed whilst not in use 1X Hand Riveter handle Nut: M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X1.0 (Metric Size) Nut: 6-32, 8-32, 10-24, 1/4-20(Inch Size)

15pcs slide hammer puller set
Specification: ARX-YC701/15
Detail: A Universal slide hammer kit(keep all parts lubricated) 1X Slide hammer mechanism 3X Jaws + nuts & bolts(Reversible for internal & external) 1X 3 way cross & 1x 2 way cross for jaw mounting 1X Conical jaw separator 1X Scr...

1/2?drill
Specification: ARX-703
Detail: Free Speed.......500rpm Spindle..........3/8?24 TPI (UNF) Inlet............1/4?NPT Weight...........1.45kgs Length...........210mm Compressor.......+13 CFM Max Pressure.....90-100 PSI + Hose.............10 mm ID

clout gun coil nailer
Specification: ARX-CR50B
Detail: A round flat-head nail up to 50mm long. Suits applications such as Ply panels, Cases and other applications where a larger head is required. Max Pressure.........90PSI Tool Weight..........2.10kgs Nail Length..........22...

1/4?universal die grinder
Specification: ARX-111
Detail: Free Speed...........22,000rpm Collet..................1/4" Standard 1/8", 3mm & 6mm also available Exhaust...............Rear Compressor............+13CFM Hose..................10mm ID Inlet..................

general purpose 3/16?riveter
Specification: ARX-200N
Detail: Capacity.........3/32" to 3/16" Tips Provided....3/32",1/8",5/32" & 3/16" Traction Power...1,450Ft Lbs Operation........Air over Hydraulic Weight...........1.78kgs Height...........275mm Air Inlet........1/4"NPT Hose......

air metal scissor
Specification: ARX-872
Detail: Sheet Metal; cutting to #20 gauge Can also be used on Thin plastics, Vinyl floor coverings, Card & Gasket Materials. Inlet..............1/4" NPT Weight.............1.16kgs Length.............290mm Compressor.........+13C...

7?angle grinder
Specification: ARX-831L
Detail: Pad Diameter...........7"175mm Free Speed.............7,000rpm spindle................5/8" x 11 TPI Inlet..................3/8" NPT Length.............390mm Including Disc Weight................3.25kgs Consumption..........


Showing 1 - 10 of 10, total 1 pages [First] [Previous] [Next] [Last]
1